Heating, Lighting, and Propagation

Milkhouse Utility Heater 

Takes a Beating ...
This heavy-duty steel heater can take the heat -- it's designed to be dented and bumped in the shop or the kitchen. But although it's tough, its fan-forced heat makes it whisper-quiet. The Titan meets safety standards with tip-over and overheat shut-off functions and comes with a one-year warranty.

... And Keeps on Heating
The freestanding heater can be easily mounted on a wall or suspended from above. Its power signal light and caution light will help you keep an eye out for overheats.

The Wonderlite 

Helps you grow by providing a light spectrum that's concentrated in the blue, red and far-red wavelengths to stimulate flowering and healthy, vigorous growth. Perfect for orchids. The 160 Watt bulb lasts for 10,000 hours and is rated at 3,200 lumens. Works in a household socket and can be used for general lighting. This bulb lights up a 15 sq. ft. area. Clamp-on fixture with on/off switch and reflector included. 

GardenHouse 400W HPS (High Pressure Sodium) Kit

We've put together an outstanding value in a high performance 400W high pressure sodium kit that will effectively light a 4' x 4' area. Kit includes a hydro-formed reflector that is the best performer of any reflector we've seen, as well as a rugged ballast housed in die cast aluminum with louvers for cooling, an 8 foot grounded power cord and a 15 foot detachable lamp cord. Kit comes complete with eyebolts, chain, and mounting and use instructions. For largest GardenHouse's, you might even want to install two. UL listed, 120 Volt.

We've taken this rugged, moisture resistant, durable commercial greenhouse thermostat and added a power supply cord with molded piggyback plug to make it a cinch to control a fan or heater in your GardenHouse. Designed specifically for greenhouse environments, this thermostat has a large easy to read dial with a temperature setting range from 40º to 110º and is encased in a corrosive resistant plastic box. Just plug the thermostat into an outlet, plug your fan or heater into the thermostat's plug, and set your desired temperature. 8 ft. power cord. Specify either cooling or heating.

This inexpensive, easy to read thermometer shows the current temperature, as well as the highest and lowest temperature since reset. It is easy to mount, resets in seconds, and is readable from the doorway of your greenhouse.